Epoxy Dome Stickers vs Soft PVC Labels for Electronics and 3C Branding

HOME >> BLOG

Epoxy Dome Stickers vs Soft PVC Labels for Electronics and 3C Branding

Time:2026-11-17
Read:7

Branding a phone case, power bank, headphone shell or laptop lid usually comes down to two processes: a cast epoxy dome sticker or a soft PVC drip-moulded label. The buying conclusion is that epoxy doming wins on optical depth and precision at small sizes, while soft PVC wins on cost per unit at larger sizes and on irregular, flexible surfaces. Choosing by process rather than by habit is worth real margin on 3C accessory programmes.

How each process actually works

An epoxy dome label is a printed substrate (paper, PET or vinyl) over-dispensed with polyurethane or epoxy resin that self-levels into a transparent lens, curing to a hard, glossy dome. Soft PVC drip labels are built layer by layer: coloured PVC paste is dispensed into a metal mould, cured, layered for each colour, and finished with a clear cap layer. Epoxy is a printing-plus-dispensing process; PVC drip is a moulding process. Everything that follows — tooling, cost structure, minimum quantities, durability — flows from that difference.

Head-to-head comparison

CriterionEpoxy dome stickerSoft PVC drip label
ToolingNone for the dome; artwork/print setup onlyMetal mould per design; each size change re-tools
Small detail & fine textExcellent — print resolution carries the detailLimited — paste viscosity limits hairline detail
Optical depthStrong lens effect; premium lookSofter gloss; layered colour depth
Flexibility of substrateBest on rigid or gently curved surfacesConformable; suits curved and flexible goods
UV / yellowingGrade-dependent; ask for UV-aged dataGrade-dependent; phthalate-free pastes standard for EU
Unit cost at small sizesCompetitive; print setup amortises fastMould cost must amortise; small runs costly
Unit cost at large sizesRises with resin volume per unitScales better; thick builds affordable

When epoxy doming is the right choice

Choose epoxy when the label is small, detailed and rigid-surface-mounted: logo badges on headphone shells, model badges on power banks, keyboard and mouse branding. Print resolution lets epoxy carry fine text and gradients that PVC paste cannot resolve, and the dome lens gives a jewellery-box depth that photographs well for e-commerce. Because no metal tool is needed for the dome itself, design changes cost a print file, not a re-cut mould — a meaningful advantage in 3C, where product generations cycle in months. The watch-outs: domes adhere to curved surfaces only within a modest radius, so heavily curved shells need PVC; and resin grade matters for outdoor exposure, so request UV-ageing data rather than accepting "non-yellowing" as a claim.

When soft PVC drip is the right choice

Choose PVC when the label is larger, thicker or must conform: bag-tag logos on laptop sleeves, raised emblems on silicone cases, flexible badges sewn or heat-pressed onto fabric goods. PVC's layered construction produces genuine 3D relief and tactile depth, and it tolerates bending that would craze a rigid dome's edge. Its mould economics reward volume: once the tool is paid, unit costs at larger sizes undercut epoxy, which gets expensive as resin volume per unit grows. For European programmes, require phthalate-free, REACH-conformant paste formulations and ask for the declaration — this is a standard request and any serious factory answers it with documentation, not assurances.

Adhesive systems and application methods

Both label types ship with pressure-sensitive adhesive backings, and adhesive choice determines whether the branding survives the product's life. Rigid 3C shells pair with high-tack acrylic films; silicone surfaces need special treatment because ordinary adhesives barely bond to silicone — usually the label is glued during overmoulding or mechanically captured instead. Specify the application surface material in the RFQ so the adhesive is chosen against surface energy, and ask the factory for peel-strength data on your actual substrate, not a generic backing spec.

Cost structure and MOQ expectations

Epoxy programmes start fast: sample setup is a print file plus dispensing parameters, with samples typically in one to two weeks and MOQs from roughly a few thousand pieces because no mould amortises. PVC drip programmes carry tool lead time of one to two weeks and MOQs commonly starting around 1,000–3,000 pieces per design to amortise the mould sensibly. Crossover thinking: for a small logo across a mid-volume phone-case run, epoxy usually wins total cost; for a 40 mm bag badge at volume, PVC usually wins. Treat all figures as planning ranges to confirm in writing.

What to put in the RFQ

  1. Label dimensions, artwork (vector) and the application surface material.
  2. Process preference or an invitation for the factory to propose one with reasoning.
  3. Curvature of the mounting surface and any flex requirement in use.
  4. Compliance scope: REACH/phthalate-free declarations for PVC, UV-ageing data for epoxy.
  5. Adhesive requirement and peel-strength target on the real substrate.
  6. Quantities per design and expected design-change frequency.

FAQ

Do epoxy dome stickers turn yellow outdoors?

Resin grade decides: aliphatic-based systems resist UV yellowing far better than economy epoxy. Ask for UV-ageing test data on the specific resin, and treat "non-yellowing" as a claim to verify rather than a property to assume, especially for goods sold for outdoor use.

Can soft PVC labels bond to silicone products?

Not with ordinary adhesives — silicone's low surface energy defeats PSAs. Workable routes are mechanical capture, overmoulding the PVC element during silicone production, or silicone-specific primers. Declare the host material early so the factory designs the attachment, not just the label.

Which process is cheaper for small runs?

Epoxy doming, because there is no mould to amortise — setup is a print file, and small MOQs are practical. PVC drip needs its mould paid back, so small runs carry a high per-unit tooling share; PVC catches up and wins at larger volumes, particularly for bigger labels.

Which process holds finer logo detail?

Epoxy doming over a printed substrate, by a clear margin: print resolution carries hairlines and gradients that PVC paste viscosity cannot reproduce. For fine text under about 1 mm, specify print-based decoration and confirm the print method (digital vs silkscreen) against the artwork.

Next step

Send your artwork, mounting surface and volumes for a process recommendation and quotation, or browse reference items under PVC drip-moulded products and silicone 3C digital accessories. Our custom OEM and ODM service covers both processes with tooling, printing and compliance documentation in-house.

Related products